20.0 mm Plain Tight TIR
|LEDs & Performances||Eff.||FWHM||Cd/lm||Spot||Cross-section||Files|
|Lumileds Luxeon Rebel Cool White||87.1%||8.6||32.5||10193_Rebel_cool_white_250408.ies|
|Lumileds Luxeon Rebel Neutral White||87.1%||8.6||32.5||10193_rebel_neutral_white_250408.ies|
|Lumileds Luxeon Rebel Warm White||84.6%||8.1||35.7||10193_rebel_warm_white_250408.ies|
|Cree MC-E XLamp® White||84.5%||20||5.8||10193_Cree_MCE_white_250408.ies|
|Cree XP-E XLamp® White||87.3%||8.2||36.3||10193_cree_xpe_white_250408.ies|
|Osram Golden Dragon W5SG Dragon White||86.0%||8.2||13.0||10193_Dragon_W5SG_White_250408.ldt|
|Osram Platinum Dragon W5SN Dragon White||86.0%||5.9||36.0||10193_PlatDragon_W5SN_wht_250408.ldt|
|Osram Golden Dragon W5SM Dragon White||90.0%||5.4||30.0||10193_Dragon_W5SM_White_250408.ldt|
|SSC A2 Acriche White||87.5%||20.7||5.9||10193_seoul_Acriche2000_cWhite_250408.ies|
|Nichia NFSW 036 Top Emitting Cool White||88.6%||5.1||41.4||10193_Nichia_036_CoolWhite_250408.IES|
|Nichia WS6W 083 Top Emitting Cool White||86.9%||10.3||12.1||10193_Nichia_083_CoolWhite_250408.ies|
|Nichia NS3W 183T Top Emitting White||89.3%||9.1||23.1||10193_Nichia_183_White_250408.ies|
|Samsung WH5 White||88.3%||11.9||9.9||10193_Sunnix Samsung_SLHNN WH5_cWhite_250408.ies|
|Lumileds ES Luxeon Rebel Cool White||85.6%||12.3||18.2||10193_Luxeon_Rebel_ES_cool_white_040311.ies|
|Lumileds R Luxeon||85.6%||12.3||18.2||10193_Luxeon_R_cool_white_040311.ies|
|Cree XM-L XLamp® White||%||16.2||10.1||20mm 10193_XML_10165_11012013.ies|
|LG 3535 Cool White||%||11.3||21.1||10193_LEMWA33X70GW00_Cold white_130412.ies|
|Lumileds T Luxeon||85.6%||12.3||18.2||10193_Luxeon T_14052013.ies|
|Related Holders & LEDs||Cree|
Golden Dragon W5SG
Golden Dragon W5SM
Platinum Dragon W5SN
|10148 20.0mm Circular Black|
|10148-TS 20.0mm Self Adhesive (TS) Black|
|10149 20.0mm Circular Clear|
|10149-TS 20.0mm Self Adhesive (TS) Clear|
|10150 20.0mm Circular White|
|10150-TS 20.0mm Self Adhesive (TS) White|
|10235 20.0mm Circular Black|
|10235-TS 20.0mm Self Adhesive (TS) Black|
|10236 20.0mm Circular White|
|10236-TS 20.0mm Self Adhesive (TS) White|
|10237 20.0mm Circular Clear|
|10237-TS 20.0mm Self Adhesive (TS) Clear|
|10276 50.0mm Triple White|
|10278 50.0mm Triple White|
|10279 50.0mm Triple White|
|10286 50.0mm Triple White|
|10288 50.0mm Triple White|
|10289 50.0mm Triple White|
|10296 50.0mm Triple Black|
|10298 50.0mm Triple Black|
|10299 50.0mm Triple Black|
|10306 50.0mm Circular Black|
|10308 50.0mm Triple Black|
|10309 50.0mm Triple Black|
|10431 20.0mm Hexagonal Black|
|10432 20.0mm Hexagonal Clear|
|10433 20.0mm Hexagonal White|
|10434 20.0mm Hexagonal Black|
|10435 20.0mm Hexagonal Clear|
|10436 20.0mm Hexagonal White|
|10566 20.0mm Circular Black|
|10566-TS 20.0mm Self Adhesive (TS) Black|
|10567 20.0mm Circular White|
|10567-TS 20.0mm Self Adhesive (TS) White|
|10568 20.0mm Circular Clear|
|10568-TS 20.0mm Self Adhesive (TS) Clear|
|10615 20.0mm Circular Black|
|10615-TS 20.0mm Self Adhesive (TS) Black|
|10616 20.0mm Circular Clear|
|10616-TS 20.0mm Self Adhesive (TS) Clear|
|10617 20.0mm Circular White|
|10617-TS 20.0mm Self Adhesive (TS) White|
|10631 20.0mm Universal White|
|10634 20.0mm Universal White|
|10636 20.0mm Universal White|
|10638 20.0mm Universal White|
|10651 20.0mm Universal White|
|10654 20.0mm Universal White|
|10656 20.0mm Universal White|
|10658 20.0mm Universal White|
|10671 20.0mm Universal White|
|10674 20.0mm Universal White|
|10676 20.0mm Universal White|
|10678 20.0mm Universal White|
|10691 20.0mm Universal Black|
|10694 20.0mm Universal Black|
|10696 20.0mm Universal Black|
|10698 20.0mm Universal Black|
|10711 20.0mm Universal Black|
|10714 20.0mm Universal Black|
|10716 20.0mm Universal Black|
|10718 20.0mm Universal Black|
|10731 20.0mm Universal Black|
|10734 20.0mm Universal Black|
|10736 20.0mm Universal Black|
|10738 20.0mm Universal Black|
|47.313.1101.80 with 47.313.-320.80 20.0mm BJB® Black|
|47.313.2401.80 with 47.313.320.80 20.0mm BJB® Black|
|47.313.5201.80 with 47.313.-320.80 20.0mm BJB® Black|
Carclo Optics endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo variations without prior notice. For correct and up to date information, Carclo suggest using the Opticselect tool on our website http://www.carclo-optics.com.
Copyright © Carclo 2010
General Instruction - Optics & Holders
Disclaimer - Optics & Holders
Please note that flow lines, weld lines, surface scratches and small black or white inclusions within the lenses are acceptable if the optical performance of the lens is within the specification described below:
For optics that have FWHMs of 20 degrees or less, the general tolerance is +/-2 degrees OR the tolerances stated below - whichever is the greater.
For all optics except Rippled and Frosted;
For all Rippled and Frosted Optics;
For all Optics;
The yellowing / browning of polycarbonate lenses and holders can occur due to the natural ageing process and exposure to heat and UV and as such is not covered by Carclo’s warranty.
General Instruction - Taped Holders
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure and moderate heat, from 100°F (38°C) to 130°F (54°C), will assist the adhesive in developing intimate contact with the bonding surface.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
During assembly the optic when placed on the PCB should be firmly held for 1-5 seconds to ensure the best possible bond. The tape will reach its final strength in 72 hours, dependent on the material and ambient conditions.
We request that the customer ensures (and fully tests) the suitability and sufficiency of the bond in his product. For example, mechanical stress, vibration and holes on the surface of the circuit board can weaken the strength of the tape.
Disclaimer - Taped Holders
Shelf Life - There is 1 year expected shelf life from the date of purchase direct from Carclo.
All Carclo lenses supplied with tape use the same high strength double-coated tape (unless otherwise mentioned in the datasheet). This tape is specifically selected for this application.
These tapes generally work well together with PCBs and LEDs on the market. The customer must take the necessary measures to ensure complete compatibility with their particular application, product, PCB, LED and/or other components.
Testing and verifying of the adhesives and their combinations is the responsibility of the customer.
The customer is solely responsible for evaluating the application of double sided tape to Carclo Holders and the adhesion of double sided tape holders to determine whether such double-sided tape is fit for a particular purpose and suitable for the users method of application. The selection of double-sided tape in the adhesion of double sided tape holders is not covered by Carclo’s warranty.
Carclo cannot take responsibility for the results obtained by others whose methods we cannot control. It is always the customer’s responsibility to determine the adhesive’s suitability for their product and to take precautions for protection of property and persons against any hazards that may be involved in the handling and use of adhesives. Carclo disclaims all warranties, including warranties of merchantability or suitability for a particular purpose, arising from use of any adhesive product. Carclo disclaims any liability for consequential or incidental damages of any kind, including lost profits.
All rights reserved. No part of this publication may be copied, reproduced in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, illustrations not to be removed, without our prior permission. Carclo Optics reserves the right to make changes at any time in order to supply the best products possible.